Applied Motion Products offers a range of motors suited for use with the STAC5 and STAC6. These motors have been tested and approved by Applied Motion Products.
Detailed specs and drawings can be found at www.applied-motion.com.
Torque curves for these motors can be found in our hardware manuals.
120V Motors - connect leads in parallel
| Part Number | Rated Holding Torque | Drive Current Setting | Resistance | Inductance | Rotor Inertia | |
| oz-in | N-m | A | Ohms | mH | oz-in-s2 | |
| HT23-552 | 75 | 0.53 | 1.7 | 3.1 | 7.6 | 1.70E-03 |
|---|---|---|---|---|---|---|
| HT23-553 | 149 | 1.05 | 1.7 | 3.6 | 12.8 | 4.25E-03 |
| HT23-554 | 227 | 1.6 | 1.7 | 4.5 | 15.2 | 6.80E-03 |
| Part Number | Rated Holding Torque | Drive Current Setting | Resistance | Inductance | Rotor Inertia | |
| oz-in | Nm | A | Ohms | mH | oz-in-s2 | |
| HT34-495 | 555 | 3.92 | 5.1 | 1.28 | 6.5 | 2.27E-02 |
|---|---|---|---|---|---|---|
| HT34-496 | 1115 | 7.85 | 5.1 | 1.56 | 10.5 | 4.53E-02 |
| HT34-497 | 1700 | 11.9 | 5.8 | 1.56 | 11.3 | 6.80E-02 |
220V Motors - connect leads in series
| Part Number | Rated Holding Torque | Drive Current Setting | Resistance | Inductance | Rotor Inertia | |
| oz-in | N-m | A | Ohms | mH | oz-in-s2 | |
| HT23-552 | 75 | 0.53 | 0.85 | 12.4 | 30.4 | 1.70E-03 |
|---|---|---|---|---|---|---|
| HT23-553 | 149 | 1.05 | 0.85 | 14.4 | 51.2 | 4.25E-03 |
| HT23-554 | 227 | 1.6 | 0.85 | 18 | 60.8 | 6.80E-03 |
| Part Number | Rated Holding Torque | Drive Current Setting | Resistance | Inductance | Rotor Inertia | |
| oz-in | N-m | A | Ohms | mH | oz-in-s2 | |
| HT34-495 | 555 | 3.92 | 2.55 | 3.98 | 26 | 2.27E-02 |
|---|---|---|---|---|---|---|
| HT34-496 | 1115 | 7.85 | 2.55 | 5.26 | 42 | 4.53E-02 |
| HT34-497 | 1700 | 11.9 | 3.2 | 5.26 | 45 | 6.80E-02 |